192.168.1.1 Login, Admin Page, Username, Password | Wireless Router Settings

192.168.1.1 USERNAME, PASSWORD CHANGE

To make your router secure you need to change the default username and password which is usually very easy to crack. For Wi-Fi security, you must change the default SSID network name with a unique name.

Default username and password for most routers are:

• Username: admin
• Password: admin

Or

• Username: admin
• Password: password

Further, you should enable WPA2 and PSK for the Wi-Fi security. You should use an updated encrypted hard password for WPA2 and PSK to make the Wi-Fi safer.

WHAT IS MY ROUTER IP ADDRESS

Setting up a new router or to configure your network requires a router IP Address which leads to login details of your router. In most cases these default IP addresses 192.168.0.1, 10.0.0.0.1 or 192.168.2.1 can be used. To know further read below.

CHANGE 192.16811 ROUTER PASSWORD

Login to your router admin page with username and password > go to advanced settings > Router Admin > Change Password > Enter the old password and New Password and save. Hurray!

IP ADDRESS OF VARIOUS ROUTERS WITH DEFAULT USERNAME AND PASSWORD:

HOW TO SETUP CISCO ROUTER USING 192.168.1.1

Step 1: Connect Cisco Router to PC

Step 2: Connect the adapter and turn on Router and PC.

Step 3: Open any Browser and type 192.168.1.1 and press Enter.

Step 4: Enter Cisco default username and password (admin-admin)

Step 5: Cisco Router Admin Page will open and now you can all the required settings for usage.

D-LINK ROUTER LOGIN SETUP

Step 1: Connect D-Link router to PC

Step 2: Connect the adapter

Step 3: Open any web browser and type http://192.168.1.1 and press enter

Step 4: D-Link router administrator will pop up. Now type in default username and password.

NETGEAR ROUTER LOGIN SETUP

Step 1: Plug Netgear router with your Windows PC

Step 2:  Open any web browser and type 192.168.1.1 > Enter.

Step 3: Enter Router’s default username and password. Make the necessary wireless Settings.

TP-LINK ROUTER LOGIN SETUP

Step 1: Connect your TP-LINK Router with the PC with the RJ45 cable.

Step 2: Open any browser. Type 192.168.1.1 and press enter

Step 3: Enter default username and password as mentioned above.

Step 4: Router Admin page will open up. Now apply the required settings.

TROUBLESHOOTING

If you are facing issue while connecting Router then these could be the possible issues.

• The default IP address is not configured properly.
• The Incorrect IP address is used in the browser or wrong settings are set up.
• The router- PC connection has network issues.
• Restart your router properly. Hold the restart button for 10 seconds.